Tuesday, October 12, 2010

Bishop Sleeves-Set In in the Round


It is a common practice among heirloom patterns, or patterns in general, when stitching the sleeves seams in a bishop, stitch the sleeve seams then pleat the bishop. Next to stitch the side seams you run the stitching down the side seam from the bottom edge of the sleeve all the way down the side of the dress to the bottom of the dress hem.  I'm not a fan. I don't want lumps and bumps in my armpits when my arm is hanging at my side and I don't imagine children do either. Especially if you have a child with sensory issues. They are going to squirm and wiggle with those seams bunching under their armpits. It is possible to have a set in the round sleeve on a bishop. I am in the process of pre-constructing a bishop for our baby and decided to share this finishing method with you, faithful reader.


The first thing you have to do when stitching your sleeve seams is to stop about an inch or two before the end of the seam.The x's mark where I stopped stitching. I had done seamless pleating on this bishop, so my seams are unfinished at this time. We'll get to that later.


I French seamed the sleeve and the sides of the dress. Yes, it is a bit fiddly, but it is worth in my opinion. Then I finished the sleeve hem with a narrow hem. You can see I haven't taken my "cheater stitching" out yet where I marked my 1/4" hem allowance. But I have a clean finish to the bottom of my sleeve without that "thing" peeking out at the bottom of the sleeve.


Here is the resulting "hole" in the sleeve seam after the French seams are done.


I pin the remaining underarm seam together matching my French seams.


I hope you can see this, the sun was shining in the window right at my presser foot. I just stitch the remaining seam, making sure to match my stitching lines from constructing the upper sleeve seams.


Voila! My sleeve in set in in the round with no lumpy fold over business under the arm. Now to finish that seam edge.

You can trim and then zig-zag the edge, you can use seam tape to finish, you can serge the seam allowance or you can use a mock rolled hem, which is what I have done.


First trim one side of the seam allowance to 1/8". The remaining seam allowance is 1/4".


I press the wider seam allowance over the shorter one with my iron. Now we are ready to do the mock rolled hem. It is also called a faux French seam, Cindy Foose calls it a toymaker stitch. Doesn't matter what you call it, it is very easy to achieve.  Along the seam on the short side, starting at the right if you are right handed, I take a stitch right next to my stitched seam. Then travel to the fold of the pressed edge of the larger seam allowance and again take a stitch. Alternate back and forth between the stitched seam and the folded edge for a couple of inches.


Then pull your working thread until the folded edge curls over to meet the seam stitching on the shorter side.


Pull until if looks like this. I have used waxed thread I purchased from Wendy Schoen. It is a Sarah Howard Stone product. Inquire at your favorite heirloom shop. Regular weight sewing thread that you wax yourself works just as well. But you really need a waxed working thread to prevent breaking when you tug to form the roll. Continue in the same way, stitching your alternating stitches for a couple inches, pull to roll, until you reach the other side. It does not take that long, I timed it, 20 minutes to do this seam.


Here is my finished faux French seam. Tiny, neat and trim. Now to apply the bias band, then I can get to smocking little punkins and leaves.

13 comments:

  1. Martha,

    Thanks for the tutorial. The photos and instructions are really clear and I'm going to try this one on the next bishop.

    ~Jenny

    ReplyDelete
  2. Excellent tutorial and supporting photos--thanks for sharing!

    ReplyDelete
  3. Wow, thanks for such a clear tutorial. I am cutting out a bishop right now! So glad I saw this before I progressed with the old method. But I do not have a pleater, is it possible to do this method without seamless pleating? I will need to seam the dress before I take it to my pleating shop. How do you suggest I do this with this method?
    Thanks,
    Shelley

    ReplyDelete
  4. Thanks for the very clear tutorial! I will definitely be using this technique.

    ReplyDelete
  5. I love it when I learn something new! Thanks, Martha, for this fabulous tute. It will be printed off and put in my tool box for the next bishop. Your clear photos and language are really appreciated!

    ReplyDelete
  6. Thank you for another great tutorial. I'd love to sit and sew with you for about two weeks, the things I could learn. I know there are alot of things you could teach me sewing related, not to mention the non sewing related items ;-)

    ReplyDelete
  7. Holy Moly, Batman! That is one fantastic tute!!! beautiful work!!!

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. You do absolutely beautiful work! I was fortunate to have my mother do all the smocking for my creations. Her work was as beautiful as yours.

    ReplyDelete
  10. Making notes ... I hope to work on a bishop after I get through this mounds and mounds of paperwork. I will need to do all these things as it is for a special princess.

    ReplyDelete
  11. You are the smartest woman in the world. I want to be you when I grow up!

    ReplyDelete
  12. You will get the sleeve sewn in the round on the bishop but I forgot about the mock french seam which I have done before and zigzagged instead, should have waited a couple of days for the reminder, oh well..the mind is a terrible thing to lose

    ReplyDelete
  13. Thanks for this tut and the seamless pleating tut. I am going to be making two bishops next and will use your wonderful wisdom. Susan VH

    ReplyDelete

Welcome, I am so glad you chose to leave a comment. I love getting comments, questions and even just a friendly hello. I may not respond to every comment, but rest assured I read them all. Sometimes the comments and questions fuel new posts. So comment away!